Ive modified 3.7.2 to enable mod support (fixed segfault on model data) and ARM64 on Raspberry PI.
The source is avalible here https://github.com/Shivansps/fs2open.github.comTested on Ubuntu Desktop (ARM64) for RPI
Part 1 : Compiling & installing Wxlauncher
sudo apt-get install build-essential libopenal-dev libwxgtk3.0-gtk3-dev git python3-markdown cmake libsdl2-devBuilding fso 3.7.2
git clone https://github.com/scp-fs2open/wxLauncher
sudo make install
sudo apt-get install libopenal-dev libjansson-dev libjpeg-dev liblua5.1-dev libogg-dev libpng-dev libsdl-dev libtheora-dev libvorbis-dev automake libswscale-dev libavcodec-dev libavformat-devChangelog:2-7-2021
git clone https://github.com/Shivansps/fs2open.github.com
sed -i -e 's/-mtune=generic -mfpmath=sse -msse -msse2/ /' ./mongoose/Makefile
sed -i -e 's/-mtune=generic -mfpmath=sse -msse -msse2/ /' ./code/Makefile
sed -i -e 's/-mtune=generic -mfpmath=sse -msse -msse2/ /' Makefile
-Fixed ARM64 build18.104.22.16891210:
-Removed forced FPS/Memory display on debug build
-Added POF version 2118 support
-Added SLC2 support
-Added bsp alignment and sldc to slc2 conversion for pof version 2117 or lower.Working or modified mod list for Raspberry PIFreespace 2 DEMO https://drive.google.com/open?id=1jF0YLc9h4X2n1rnAu61tp1_7QTjMROOq
Use "Strech interface to fill screen" under "Gameplay" to play at more than 800x600 in a window.Wing Commander Sagahttps://drive.google.com/file/d/1xZzG44fPJn1X27JU13_KvunalqETtHMV/view?usp=sharing
Use "Disable GLSL Shadder support" for fps boost
Techroom usually (not always) crashes.
As of 2-16-2021 all mods that can run on 3.7.2 should be now be able to run, as the GPU driver for Ubuntu Desktop now shows support for S3TC texture compression and the model and shield data is fixed on model load. I tested Mediavps 3.7.2 (2014) whiout mv_advanced and it runs at 30 fps at 720p with some dips to 25fps, retail runs at 60 fps with dips to 40 fps.