Hard Light Productions Forums
General FreeSpace => FreeSpace Discussion => Topic started by: Vasudan Admiral on May 30, 2012, 11:43:13 pm
-
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120530_201108.jpg)
So I bought and built a 3D printer - (a Reprap Huxley), which means I can now do cool stuff like this! :D
These models are around 13cm long, and have been amazingly painted by a friend of mine who's an expert miniature painter. (Check out his site for more pics of the Fenris (http://brushwithdestiny.wordpress.com/2012/05/27/gtc-fenris/) and Aeolus (http://brushwithdestiny.wordpress.com/2012/05/30/gtc-aeolus/) - there's some superb stuff on there)
So I was just wondering if anyone would be interested in getting some printed & painted FS miniatures? :)
Though it would vary with the desired size and complexity of the ship, the basic cost would be about AUD $36 for a similarly sized model, + AUD $15 for a basic-colours-only sort of paint job up to AUD $30ish for the kind of detail seen on the Fenris + postage.
PM me or post here if you're interested. :)
-
Where were you when we made Carl in 2008? :p
-
We should get the Vasudan printed...
-
holy **** do want
I mean, I don't know that I have the spare cash (or for that matter, space) for them at the moment, but that definitely piques my interest. :)
-
You should print the Iceni, so you can put the Iceni on a little stand next to your monitor and window and talk about troy and stuff
-
I see you humans are already working on replicator technology. You still have a long way to go, though.
-
with the prices of 3d printers now in the $400-$500 price range im probibly gonna get one this fall. its probibly not gonna be a reprep, unless their prices come down a lot. then i can print enclosures for my electronics projects and a nice set of grips for the joystick of doom.
-
You should print the HTL Typhon for yourself. You deserve it. :)
-
:eek2: WOW. That's amazing.
I'll be very interested by a painted HTL Sathanas (The RGA_Noris one), but I don't know if it's not too much detailed ?
And also, posting here to ask (maybe useful for others) : Can you use a Paypal for the transaction ?
Great work !
-
I actually tried doing this with a Makerbot Cupcake at my local hackerspace, for FringeSpace... for whatever reason ReplicatorG doesn't like my models.
-
wow, that's so cool!
-
:eek2: WOW. That's amazing.
I'll be very interested by a painted HTL Sathanas (The RGA_Noris one), but I don't know if it's not too much detailed ?
And also, posting here to ask (maybe useful for others) : Can you use a Paypal for the transaction ?
Great work !
Hmm, I could make the arms separately - which would mean I could print them much more accurately, and also the ship could be bigger overall. So yeah - a Sathanas should be quite possible!
So would you be interested in getting one? If so I'll send a pic to my painter friend to get a cost estimate. :)
And yeah good point - Paypal should be fine. :)
Where were you when we made Carl in 2008? :p
Ooh I could probably print a second Carl. That'd be pretty cool. :D
-
Awesome :D
I'll have to take a look and see if there is an HTL Ulysses yet :nervous:
-
Ooh haven't you seen it? It's one of my favourite HTLed ships! :cool: (made by peterv)
http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/Ulysses/HTL_Uly4.jpg
http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/Ulysses/HTL_Uly5.jpg
-
Cool :D Always was my favourite ship.
I might PM you in a couple of days, will need to do the 'close one eye and glance quickly at the credit' trick on my bank account ;)
-
PM sent :yes:
-
But will it get TI done more quickly?
-
Awesome ! :eek:
I have to send the link to this topic to a friend who is actually building a 3D Printer...
We talked about good old tabletop miniature gameing, and he said something about making miniatures. Time to remind him... :D
-
Can you get an estimate on the Vasudan model? (http://p3d.in/g7jv0)
-
Can you get an estimate on the Vasudan model? (http://p3d.in/g7jv0)
You should make a version with ball and socket joints so it is pose-able :)
And then take a photograph of it holding Action Mans' head...
-
Put a HEADZ box nearby too. :)
-
I want one!
-
Anyone else think a Solaris would be awesome?
-
Anyone else think a Solaris would be awesome?
-
I want one!
Haha is that an actual 'want' want? As in a Vasudan action figure (Yes he will have a miniature cardboard Headz box - already decided on that. :D ) or ship model?
-
Very cool, indeed! The Aeolus looks badass. I might be interested in a Perseus, but I also have to check my finances first. I'll let you know. :)
-
:nervous:
How much would an Orion cost me?
-
Do we actually have a finished Shivan model that could be printed? If so, I might be interested in one depending on costs.
-
We have a low-poly one. (Carl)
There is a high poly one in progress for my cutscene upgrades.
-
I would definitely be interested in getting a ship model of some kind, but I'm not sure what ship I'd like to choose. I'd lean towards an Apollo, though. :P
-
We have a low-poly one. (Carl)
There is a high poly one in progress for my cutscene upgrades.
Pah. When Carl was your model's age, he was high-poly!
-
Come on Goober. Do you want to be this guy ? :p
-
:nervous:
How much would an Orion cost me?
I've just done some calculations, and I can make the Orion: (MVP or Retail model btw?)
~13cm long for $36 AUD
~20cm one for $44 AUD
~25cm one for $52 AUD
Do we actually have a finished Shivan model that could be printed? If so, I might be interested in one depending on costs.
Well the printer isn't that well suited to little organic shapes unfortunately, so it's a bit hit and miss detail wise in the final result. (It's also a heap more work to make them than typical ship models, and for some reason [v] made both shivan and vasudan physiology involve these preposterously tiny limb connections which don't help! :\ )
What size were you thinking though? :)
-
It wouldn't be very big. Maybe 12cm in length.
-
I would definitely be interested in getting a ship model of some kind, but I'm not sure what ship I'd like to choose. I'd lean towards an Apollo, though. :P
I would also put down some $$ for an Apollo.
-
I would definitely be interested in getting a ship model of some kind, but I'm not sure what ship I'd like to choose. I'd lean towards an Apollo, though. :P
I would also put down some $$ for an Apollo.
Same here ...
... also a HTL Lucifer would be nice ... or a Ravana ... (but I guess that's wishful thinking considering the shapes of most shivan ships are just to frail for 3D printing as I come to understand)
-
I want one!
Haha is that an actual 'want' want? As in a Vasudan action figure (Yes he will have a miniature cardboard Headz box - already decided on that. :D ) or ship model?
Ship model, but I don't know which one yet. Hard to choose just one...
-
Ok I think I'll need to test print a Shivan figurine since I have no idea how it will turn out. :\ We shall see!
Aiming for 13.5cm wide (largest dimension), 10.5cm long and 10cm tall.
-
Ok well I'd call that a success!
Meet Karl, distant subspatial cousin of Carl. Thrice removed.
He may be held together with a bit of bluetac pending some minor repairs, but:
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120606_211345.jpg)
With a pen for size reference (http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120606_211413.jpg)
So yes, shivans are indeed possible. :)
-
All you need to do now is stick a laser in its head... =p
-
All kneel before out new Shivan overlord.
-
Ha! We should have Karl meet Carl.
-
Except that I think we've officially reserved the name Karl for the high poly version... :nervous:
-
Wait what where.
It's not official if it's not officially said somewhere !
There's always "Qarl" :|
-
http://en.wikipedia.org/wiki/Carl_(name)
Carl
Pronunciation Carl
Gender Male
Origin
Word/Name Old Norse
Meaning "free man"
Freeman anyone?
/me bolts for the door
-
http://en.wikipedia.org/wiki/Carl_(name)
Carl
Pronunciation Carl
Gender Male
Origin
Word/Name Old Norse
Meaning "free man"
Freeman anyone?
/me bolts for the door
How about Morgan? ;7
-
http://en.wikipedia.org/wiki/Carl_(name)
Carl
Pronunciation Carl
Gender Male
Origin
Word/Name Old Norse
Meaning "free man"
Freeman anyone?
/me bolts for the door
How about Morgan? ;7
or Gordon? :P
-
Gordon Carl?
-
An orange Shivan with a crowbar? Now here's a frightening thought ...
-
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120613_181503.jpg)
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120613_181538.jpg)
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120613_181602.jpg)
Hide your local stars and Colossii, the Sathanas is in town!
21cm (8.25") of Rga_Noris flavoured death-with-spikes-on-it.
(Note the arms aren't glued yet due to the certain doom they would face if I tried to send it to the painter like that. Go blutac. :) )
-
sonofa
DIVE DIVE DIVE HIT YOUR BURNERS PILOT
-
:D
HOW NICE ;7
-
Crying tears of joy here :yes:
Maybe PMing you soon VA.
-
Shivans got to earth.
Well crap, we're doomed now.
-
Ooh, the grooving makes it look even more insecty and shivan. I like.
-
So, where are the guys making a Tabletop out of it?^^
-
Akalabeth Angel's Babylon 5 Wars adaptation for the FS universe might be a good place to start: http://knossos.firenebula.com/ (http://knossos.firenebula.com/). However there could be some problems with scale involved.
-
This is really really cool
-
Akalabeth Angel's Babylon 5 Wars adaptation for the FS universe might be a good place to start: http://knossos.firenebula.com/ (http://knossos.firenebula.com/). However there could be some problems with scale involved.
Really? Scale?
I have a Landraider, which can transport up to ten Terminators...but a Termi is almost as high as a Landraider, so that should work.
-
:eek2: Holy crap that thing is far creepier than ingame.
-
Man, if you could rig up some red LEDs in strategic spots...
-
Very awesome (and very expensive too i imagine). What does it do the prints in, wood/plastic?
...And now i can't get the thoughts "Table-top" and "Battlefleet Gothic-esque" out of my head! :lol:
PS: Tell your freind he is indeed a bloody awesome painter.
-
Model wise the sath is about $50 AUD and $35 for painting. The material is extruded ABS plastic, and it works by putting down layers of material rather than carving it away from an initial block. Less wasteful and more flexible. :)
I think technologically the next step up from this type of printing is laser sintering, which is very wasteful and the results are not as strong, but it provides a much finer detail resolution than extrusion printing can.
And haha, yeah tabletop game pieces would be totally possible!
-
Akalabeth Angel's Babylon 5 Wars adaptation for the FS universe might be a good place to start: http://knossos.firenebula.com/ (http://knossos.firenebula.com/). However there could be some problems with scale involved.
Really? Scale?
I have a Landraider, which can transport up to ten Terminators...but a Termi is almost as high as a Landraider, so that should work.
I've only had a cursory look at B5 Wars online but I believe it's hex-based, so you'd either need larger hexes (and hence a larger space to play on) or smaller models. There is a non-hex based ruleset in the War of Retribution supplement for the 1st edition though.
-
Very awesome (and very expensive too i imagine). What does it do the prints in, wood/plastic?
...And now i can't get the thoughts "Table-top" and "Battlefleet Gothic-esque" out of my head! :lol:
PS: Tell your freind he is indeed a bloody awesome painter.
it would probibly be cheaper in the long run to just get a 3d printer for any kind of large scale production runs like that, especially since 3d printers are really coming down in price (http://hackaday.com/2012/05/16/silidoodle-a-500-3d-printer/). i may get one of the those (though i may get a laser cutter instead).
another thing that was on hack a day not too long ago was an article about the legal ramifications of printing models of copyrighted materials (particularly from warhammer), that may interest you.
http://www.wired.com/design/2012/05/3-d-printing-patent-law/
-
Very awesome (and very expensive too i imagine). What does it do the prints in, wood/plastic?
...And now i can't get the thoughts "Table-top" and "Battlefleet Gothic-esque" out of my head! :lol:
PS: Tell your freind he is indeed a bloody awesome painter.
it would probibly be cheaper in the long run to just get a 3d printer for any kind of large scale production runs like that, especially since 3d printers are really coming down in price (http://hackaday.com/2012/05/16/silidoodle-a-500-3d-printer/). i may get one of the those (though i may get a laser cutter instead).
No way, I believe injection molding is far quicker and cheaper per unit to mass produce. 3D-printing in my opinion is only good for prototyping and small-scale production of models that can't be molded for one reason or another.
Sath looks awesome, btw. :yes:
-
another thing that was on hack a day not too long ago was an article about the legal ramifications of printing models of copyrighted materials (particularly from warhammer), that may interest you.
http://www.wired.com/design/2012/05/3-d-printing-patent-law/
I'm giving you clearance codes to eliminate that sector of the UK, Nuke. No matter how much we may love Warhammer here, at some point some things must be done for the greater good.
-
Very awesome (and very expensive too i imagine). What does it do the prints in, wood/plastic?
...And now i can't get the thoughts "Table-top" and "Battlefleet Gothic-esque" out of my head! :lol:
PS: Tell your freind he is indeed a bloody awesome painter.
Hm, some of the rules of Full Thrust may work:
http://en.wikipedia.org/wiki/Full_Thrust
-
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120618_220342.jpg)
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120618_220414.jpg)
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120618_220452.jpg)
Bobboau's HTL Orion!
Other angles are here (http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120618_220430.jpg) and here (http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120618_220400.jpg).
It's 16.5cm (6.5") long and has 6 steel rod antenna (apparently plastic thin stuff was breaking during shipping) even though I managed to get pics that all hide 3 of them. :\
-
Mind you, it looks a bit like ice cream...
-
GTD Chocolate reporting for duty.
-
noice!, it looks delicious it will attract shivan bombers before long c:
-
OK, now we need an orion with an overglossed whitish texture for the next parody campaign. Or dream mission in a regular campaign.
-
I can has sprinkles?
-
I thought that it looked like it might be made of soap. Maybe we need a Legion Hulk next (and I'm not talking about the Green Guy from Marvel).
-
I worry about you lot. :p
-
It's par for the course, given that the old HLP was apparently wackier than this. :p
-
lies.
and i refuse to believe anybody was wackier than the old teamwars ilk.
-
(http://www.shatteredstar.org/groups/freespace/freakspace/fullsize/freakspace05.jpg)
But it turned out all they wanted was our tea.
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/Karl1.jpg)
Karl has arrived.
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/Karl2.jpg)
BTW, I love Freakspace (http://www.shatteredstar.org/groups/freespace/freakspace.html). :D
-
F*ck yeah.
-
I never imagined I'd see something that warrants the use of this again...
/me fires his LRABeam.
(https://public.sn2.livefilestore.com/y1p3Y6Z-uklWrxOswDI4LiNzSBh8SjE8jlhrboqYclhR72vsunbVeGWMVJFhZrFcUR40SM42z0jPcPXPb5c6P3ugg/LRAYeah.png)
-
more sweeet stuff, now excuse me while I run away from the shivan. :P
-
Oh wow:
(http://brushwithdestiny.files.wordpress.com/2012/06/sathanas.jpg)
(http://brushwithdestiny.files.wordpress.com/2012/06/sathanas2.jpg)
(http://brushwithdestiny.files.wordpress.com/2012/06/sathanas3.jpg)
And a size comparison:
(http://brushwithdestiny.files.wordpress.com/2012/06/sathanascomp.jpg)
-
That is some nice looking work
-
Looks even more scary than ingame.
-
Holy. ****.
-
Oh man, a Sathanas. They're hell of a lot more frightening in real life. :shaking:
-
acwatudidthar
And I am ashamed I didn't make that reference myself :p
-
Amazing work, wish I had the cash to buy a couple of dem Sathaneses... :shaking:
-
Oh wow:
CUT
A truly Shivan design. :yes2::nod::yes:
-
Oh my truely amazing but I wonder if it's possible to use sandpaper to make some pices even smoother? (and dare I say better?) Perhaps the paint will have a hard time staying humm... Anyway what are you gonna print out next? :D
-
And a size comparison:
(http://brushwithdestiny.files.wordpress.com/2012/06/sathanascomp.jpg)
For thousands more years the mighty ships tore across the empty wastes of space and finally dived screaming on to the first planet they came across---which happened to be Earth---where due to a terrible miscalculation of scale the entire battle fleet was accidentally swallowed by a small dog.
-
Amazing work, wish I had the cash to buy a couple of dem Sathaneses... :shaking:
You could array them in a circle around your table lamp. ;)
-
Oh my truely amazing but I wonder if it's possible to use sandpaper to make some pices even smoother? (and dare I say better?) Perhaps the paint will have a hard time staying humm... Anyway what are you gonna print out next? :D
I believe acetone vapor is actually the preferred method, if you know how to deal with the dangerous fumes and fire hazard.
-
Amazing! :cool:
-
And a size comparison:
*snip*
For thousands more years the mighty ships tore across the empty wastes of space and finally dived screaming on to the first planet they came across---which happened to be Earth---where due to a terrible miscalculation of scale the entire battle fleet was accidentally swallowed by a small dog.
Hitchhiker's Guide to the Galaxy. :yes:
-
Haaaaaa.
Whhaaaaaa..
UUuuuuuuaaaahhh...
I need one of those. Right on my desk. Amazing work.
Edit: I have narrowed down my options to 6 choices:
Rakshasa
Lilith
Hatshepsut
Colossus
Deimos
Pegasus
I want to buy them all, but to get them all painted would be a whopping $450 USD. Obviously, the Pegasus would be the easiest, but I would like your input on the matter, Vasudan Admiral. What might be the best choice? I'm looking for the highest res possible, so that would be harder on a ship like the Collie.
-
It would also be stupid to make a Colie now when the new WIP HTL isn't out of the door yet.
-
New Collie is ready, except for the normal map. VA doesn't need a normal map for this and VA has access to FSU's WIP models...
-
Hehe, that's where the badge comes in handy! :p
edit: Beaten by mjn!
azile0: Haha the Pegasus would probably be the hardest actually due to how wafer thin it is. They should all be possible though. :)
As for the highest detail....hmm. I personally think the surface of the printed objects favours Shivan stuff the best - where the line between 'hull detail' and 'printed layer' becomes blury. However if you're talking purely in terms of which ships would have the vast majority of their detail survive the print, roughly everything cruiser size and down should be pretty much all there. (I may have to exaggerate or remove some features depending on the ship though - the HTL Lilith and Rakshasa have a lot of very tiny detail)
Corvette and above likely means things like rotating turrets or radar dishes begin to become just little lumps on the hull, and on supercaps they wouldn't be there at all.
Overall my estimate on the 'cool factor' those ships would have compared to each other once printed would be:
A ~20cm (8') Hatshepsut
A ~15cm (6') Lilith
A ~15cm (6') Rakshasa
A ~15cm (6') Deimos
A ~20cm (8') Colossus (Though for the Big C I'm thinking it might be possible to go 30cm (12') for ultimate awesome factor)
A ~15cm (6') Pegasus
Hope that doesn't confuse things further!
-
Heh, now I'm dreaming about models of GTD Nephelai from Shadow Genesis and GTD Boreas. These models looks great. Good work :yes:.
-
Would love to eventually see the Ravana or, appropriately, the Iceni.
-
Would love to eventually see the Ravana or, appropriately, the Iceni.
I have a visual on the Vindicator, but the Iceni is no where to be found. Either recon screwed up, or Bosch jumped already.
-
Make a full scale Icanus
-
I don't think his printer is big enough.
-
Do it in sections
-
Well..., we all know where our next few + paychecks are going!
Bloody awesome work there, and tops to the painter of the Sath. It's unreal
-
Make a full scale Icanus
I don't think his printer is big enough.
Do it in sections
:lol:
I think it would be cool to have a PVI Karnak with a Typhon parked next to it. :)
-
No more Orion flavoured ice cream. :p
(http://brushwithdestiny.files.wordpress.com/2012/06/bastion4.jpg)
(http://brushwithdestiny.files.wordpress.com/2012/06/bastion2.jpg)
(http://brushwithdestiny.files.wordpress.com/2012/06/bastion5.jpg)
(http://brushwithdestiny.files.wordpress.com/2012/06/bastion3.jpg)
I can't believe how much detail he's packed into such tiny spaces - the model is just 16cm (6 1/4') long, meaning the above pictures are twice as big as the ship itself!
His blog page for the Orion: http://brushwithdestiny.wordpress.com/2012/06/28/the-gtd-bastion/
-
:o sweet! But why the bastion instead of the galatea? :p
-
GTA pride.
-
The Bastion looks like it was given an SOC paintjob. Even the MTD Auriga looks like a kid's playtoy compared to it.
-
Hey gang :)
I'm the painter, and I figured I should have a look-see at what's going on over here at Hard-Light.net :)
Thanks for all the positive feedback :D
And I hear you Oddgrim :) I'm seriously thinking about getting VA to make me a Lucifer and the Galetea to scale with each other, getting a big wooden base, and re-creating the death of the Galetea with miniatures :D That's a pet project, though, so no idea if/when I'll actually get around to it :P
-
Hey gang :)
I'm the painter, and I figured I should have a look-see at what's going on over here at Hard-Light.net :)
Thanks for all the positive feedback :D
Great job, That Guy. As somebody who dabbled in paintings miniatures for tabletop games (with very poor results :P), I am really impressed with the amount of details you've managed to put on such a model!
And I hear you Oddgrim :) I'm seriously thinking about getting VA to make me a Lucifer and the Galetea to scale with each other, getting a big wooden base, and re-creating the death of the Galetea with miniatures :D That's a pet project, though, so no idea if/when I'll actually get around to it :P
DO IT. DO IT NAU :D
-
Any plans for some stop motion animation? :D
Would love to see some famous battles recreated!
-
I've always been partial to the Bastion over the Galatea myself.
The model looks ****ing sexy
-
Any plans for some stop motion animation? :D
Would love to see some famous battles recreated!
With jellybeans for blob turrets!
-
twizzlers for SSL. painted straws with the little fuzzy puff things at the base for beams? :nervous:
-
twizzlers for SSL. painted straws with the little fuzzy puff things at the base for beams? :nervous:
Ah, you mean bendy-straws...
-
With jellybeans for blob turrets!
twizzlers for SSL.
These 3-D printers are pretty cool, but suddenly I'm thinking gingerbread.
-
^ Design that printer now!
-
did you know you can 3d print in chocolate (http://hackaday.com/2012/02/29/new-extruder-3d-prints-tasty-treats-using-chocolate/)?
-
Chocolate Shivans anyone?
-
Chocolossus.
-
These are amazing!
I can't decide if I would want a model of the Galatea, a Perseus, or a Hercules (Mk. I) more... I'm trying to tell myself I shouldn't consider spending money on something like this, but the FreeSpace fan that has been suppressed inside for so long is screaming that I need one! :yes:
Great work!
-
Can you do fanmade ships as well? I'm not requesting you do one, just asking if it's possible.
-
Yeah - I should be able to print pretty much anything with a model file, though how easy it is depends on the desired model size and complexity. Most stuff should be fine though. :)
Anyway just got the printer back up and running after part of it melted and then shorted when printing that last Orion, so...watch this space!
-
i want one of these:
http://hackaday.com/2012/07/13/3d-printing-with-a-delta-robot-that-seems-to-simplify-the-concept/
note the print speed and size of the print area, and the lower number of parts. the printable parts are all on thingverse. i hope he comes out with a competitively priced kit, so i can get everything i need to build one in one package.
-
Damn.. I hate being the bringer of necrothreads.
How are these going Vasudan Admiral?, I'm interested in a purchase if you are up for it later on.
-
Oh oops, sorry I went off on holidays the day this was posted, so I'm only seeing this now! I intended to necro this thread when I got back anyway, so this works out nicely.
But yeah I do still make these. :) If anyone is interested, send me a PM with what ship model(s) and you would like, and your preferred bow to stern length and I'll get back to you ASAP.
Firstly, I have a 20cm, (8inch) MVP Orion and stand for sale if anyone is interested?
The fella who asked me to make it sadly seems to have vanished without a trace, so it's currently at the painter's awaiting an owner before it can be painted and make the jump through the local post office node.
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120928_152058.jpg)
===================================================================================
Secondly, I had hoped for some new painted pics, but the painter has been incredibly busy over these past few months so I'll just have to show my own amateur unpainted pics instead:
Lucifer and to-scale retail Orion
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120930_160951.jpg)
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120930_143510.jpg)
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120930_160851.jpg)
Even bigger than the Sathanas, these two models were a bit of a nightmare to print and assemble (the stern of the lucifer practically killed the printer, though the model itself only needed some gap filler to get the surfaces back to rights). The Lucifer came in at about 30cm (12inches).
===================================================================================
Wall mounting
An idea from Cobra, this ended up working really well!
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120930_161453.jpg)
(http://i5.photobucket.com/albums/y184/VA--Twisted_Infinities/3D_Printer_Stuff/20120930_161441.jpg)
So yeah - future orders can choose whether they want a stand or wall mount. :)
-
Oh Gawd...wish i had the $$ for these :( :(
Really Awesome stuff VA! :yes:
-
Holy crap I want one of those for my dorm room. RIGHT NOW. I mean seriously, that's godly cool.
-
If I had money I'd totally buy that Lucifer off of you if you are selling it, hooooly sheet.
I should get my new Orion done ASAP so you have to reprint. It'll be my special brand of revenge! :P
-
If I had money I'd totally buy that Lucifer off of you if you are selling it, hooooly sheet.
I should get my new Orion done ASAP so you have to reprint. It'll be my special brand of revenge! :P
yes but
FINISHING MODELS IS OVERRATED
-
(http://24.media.tumblr.com/tumblr_m0scugsLut1r786ovo1_500.jpg)
-
My god. I need to replace my Bastion model you sent me a few months back with a wall mounted version. Too bad I won't have moneyz till the summer.
If you're still making, I'm still buying..
-
Thread Necromancing, heyooooo - GamesCom is in august, and after GamesCom is done, I will get myself some money together and get myself a nice, ass-whooping GTD Orion for my desk <3 Love that space brick.
Anyway, how're the chances of getting a UEFg Karuna or a UED Solaris? Figure they might be a bit high-poly and fragile *smirks*
Maybe a UET Upanishad? Pretty please?
... can anyone tell I like the UEF ship designs?
-
I'd probably need to thicken up some parts but yeah they should be possible. :)
-
If I had the money......
-
Those UEF ships would be ****ing cool if the rotators are spinabble... *hlp needs a drool emote*
-
Right, I wanted one of these... what would the cost be for that Fenris, painted, and shipped to Israel? ;)
-
Uhuau, super !
-
I NEED the Lucifer. I will die without it!
-
Any chance you could try making a GTD Hades model? Maybe 10-12 inches long?
-
Unfortunately the painter seems to have dropped out of contact sorry! :( (We've been out of touch for a while, and... I think he got married and also got a job with more pressing time commitments) I'll let people know if he does reappear.
For the moment then I can really only offer unpainted plastic models of ships, which does feel less cool, but I am happy to do that if people want.
-
Shoot, we all want pretty pictures! ;7 Even unpainted, they're awesome!
-
Besides, I want to gauge the cost of owning one of these beauties!
-
How much would a hi-def Durga about 7" run to?
-
Let me know if you hear back from your painter or if you find another. I'd be willing to shell out $$$ for a painted SD Ravana between 8-12in. :)
-
Almost posted "but he's been posting in this board recently!", only to realize that's "That Man" and your painter is "That Guy".
Dang. :(
-
That Man, he is an imposter. Seize him.
-
So I was looking to buy crafts from every class except colossus sized ones until I realised that a destroyer to scale of even a 3 cm fighter would be too large for anything. :(
Still, how much would it cost to have the following:
Cruisers: 2-3 cm x 5
Corvettes: 6-8 cm x 4
Destroyers: 20-21 cm x 2
-
OmG I'd love to get the medusa bomber... or the herc 2!
-
OmG I'd love to get the medusa bomber... or the herc 2!
+1 on the Medusa!
I'd also like the Pegasus or Herc MK1.
-
Hey guys, hate to bother you, but I could relive some of my childhood dreams if I could get either the Sathanas or the Lucifer printed out. (Preferably the Lucifer, FS1 was my baby).
I have access to a 3D printer and would love a Freespace Christmas. But I NEED stl files to print. Don't know where to get them.
-
Orion (MVP and Retail): http://www.mediafire.com/download/90vjua9iljcjodm/3DPrintedOrion_Retail_MVP.zip
Lucifer: http://www.mediafire.com/download/d85h6f09eko76cf/3DPrintedLucifer.zip
Sathanas: http://www.mediafire.com/download/6eaij6d0wbupc6b/3dPrintedSathanas.zip
Be sure to upload pics if they come out nicely. :)
(BTW just so people know, I can't make these any more due to a lack of free time. Sorry!)
-
(BTW just so people know, I can't make these any more due to a lack of free time. Sorry!)
:(
-
Are there any guiding for conversion from dae?
-
I'd hate to necro this thread but I really would like to know how does one acquire the STL files. Are they obtainable and convertable somewhere in the game directory, or do you have to manually model and CAD the thing from scratch? I am interested in making more of these printable ship models myself, and perhaps getting them printed too, and with the advent of 3D printing, it'll be great if we could share our STL files publicly. Would be interested to start making models like the Appollo. After all, thats the very first taste of the pilot seat in Freespace, no? :)
-
Those pics are incredible!
I posted a thread about making 3D prints of ships... anyone have any thoughts on converting Freespace's POF files into something a 3D printer can use, like STL or OBJ? I /WILL/ pay money for a Raynor-class destroyer... probably more, if I can get file converters for myself.
-
Do you mean like:
1. export dae in pof
2. import dae in blender
3. export whatever you like?
-
I mean export POF model files into another format, ideally DAE, OBJ or STL, so I can have a few choice favorites for myself. Not looking to market them... unless there's a market for such things.
-
I mean export POF model files into another format, ideally DAE, OBJ or STL
Do you mean like:
1. export dae in pof pofcs
2. import dae in blender
3. export whatever you like?
(http://oi68.tinypic.com/qzndyd.jpg)
Or am I actually reading you wrong?
-
I mean export POF model files into another format, ideally DAE, OBJ or STL
Do you mean like:
1. export dae in pof pofcs
2. import dae in blender
3. export whatever you like?
(http://oi68.tinypic.com/qzndyd.jpg)
Or am I actually reading you wrong?
Wow. That's it. But when I go to my PCS install, the only option I have in the drop down is for POF. Am i missing an addon?
-
Are you sure you have the latest build? (http://www.hard-light.net/forums/index.php?topic=77292.0)
-
Well, paint me in chocolate. Not sure what I was missing, but that did it.
-
Hey guys! I apologize for the necropost, but I have been lurking on this forum for a long time now and I wanted to ask for some help related to this topic. I recently got a 3D printer, and I have been interested in printing some FreeSpace models in my free time. I already printed the Orion model (I don't have any pictures unfortunately), and I attempted to print the Lucifer, though it was unsuccessful so far. I really want to print more models, but unfortunately I don't have FreeSpace installed on my computer. I was hoping some of you guys might be able to help out by uploading .stl or .obj files that I could print. I also know that the model files are .pof, so I have no idea how to convert that to something my printer can recognize, so any help would be much appreciated. Thanks in advance!
-
Hey Vector, if you reread the last couple pages' worth of posts, you should find everything you need. It worked for me... and I was able to (eventually and through a bit of a roundabout process) export a handful of ships to a format a 3D printer can use. Only tried with the GTD Sirona so far, and the result was beautiful. Smaller than I was expecting though, but that's cuz I suck at visualizing size. Don't have pics though, but I do have the model ship itself. Just haven't painted it yet, but it's still packed in a box until I can get a display shelf to put it on. THEN there will be pics!