[chief1983]

Except it was posted just a bit later how to fix it apparently.  Wasn't it?

[Commander Zane]

Wherever this is in the table:
*Note, it's the highlighted text*

I enabled an effect in the post_processing.tbl using the AlwaysOn flag, and bloom now works even if the default value for that effect is set to 0.

Because I see nothing in the post_processing.tbl that has anything to do with Bloom, and I got the file from the very download link on this release page, would be great to know what this "an effect" is so I can take care of the issue.

As far as I'm concerned, it wasn't posted because that post doesn't properly explain what exactly was enabled, just "an effect."


Edit:
Looks like setting any of the five effects on will force Bloom to display, well now it's more specifically explained for those who end up getting the same problem.

[Waistless]

would be great to know what this "an effect" is so I can take care of the issue.

Where's the "any key"?

Well in any case, to be more specific I used the "film grain" entry because that does nothing when the 'default' value is set to 0.0. (I've discovered that other entries may still change things even with default set at 0.0)

[Commander Zane]

Actually it was more leaning to the fact that you could be talking about any of the effects rather than a specific one, and yes, through looking at each effect myself which I was basically forced to do, some do things while others do not, I stuck with Contrast, having Film Grain on actually looked pretty cool for a while and the same with Stripe. I tried the Noise effect and holy crap you can't see a thing.

On your quote, the first person I thought of was one of the Marines from Starcraft, rather than Homer.

Huh...it says, 'Hit any key'...well, which one's the 'Any key?!'

[Waistless]

I'm getting that with the noise effect as well at the moment, it probably isn't working. This post appears to show how noise distortion is meant to look.

And Ill try and make my future posts a little less ambiguous

EDIT: link fix

[attachment deleted by admin]

[Commander Zane]

Well yeah, I've seen the shots before, by the way your link is borked, the "%22http//" on the URL goes to a cannot display page.

[Col. Fishguts]

As Post Processing is a new feature, as are the Unified Shaders, don't forget to grab FSU_and-PostProc_Shaders.7z

So, we can throw out all previous *.sdr files from the /effects folder now?

[Commander Zane]

That screenshot looks like an overcast night sky, pretty cool actually.

[chief1983]

Fishguts, pretty much yeah.

[Enioch]

Looks like setting any of the five effects on will force Bloom to display, well now it's more specifically explained for those who end up getting the same problem.

No, it won't.  I may sound stupid, but, while I get post-processing out of RC1, it seems not to work with RC2. I've turned every effect on. (By that I mean I deleted 'false' in the tbl and wrote 'true'. Did I do that right? )

I never tried to use post-processing before, and I hadn't tried RC1 before, either. In fact, I jumped straight from 3.6.10 (trunk) to 3.6.12 RC2. And I only downloaded the new launcher (had 5d), the first RC2 Inferno build and the shaders. Unpacked those in freespace/data/effects and data/tables, as per instructions.

Like I said, it seems to work with RC1. But, before I post an error log, I thought I'd ask if I had done something really stupid.

Cheers

[FUBAR-BDHR]

Did you turn post processing on in the launcher?  It's been moved to the experimental section. 

[Enioch]

I almost didn't.  But then I did. Nope. Still doesn't work

[Commander Zane]

Looks like setting any of the five effects on will force Bloom to display, well now it's more specifically explained for those who end up getting the same problem.

No, it won't.  I may sound stupid, but, while I get post-processing out of RC1, it seems not to work with RC2. I've turned every effect on. (By that I mean I deleted 'false' in the tbl and wrote 'true'. Did I do that right? )

You must be the first then, since it worked for myself and Waistless.

[chief1983]

Try just enabling only one effect, preferably one stated earlier as getting pp to work?

[Enioch]

Tried it out with only the contrast and then with only the stripes enabled. Still no luck. Remind me, how do I get a debug log? I once knew, but the knowledge got lost in the depths of time...

[Jeff Vader]

Remind me, how do I get a debug log? I once knew, but the knowledge got lost in the depths of time...

The knowledge got stickied.

[Enioch]

Hokay then,

Code: [Select]

==========================================================================
DEBUG SPEW: No debug_filter.cfg found, so only general, error, and warning
categories can be shown and no debug_filter.cfg info will be saved.
==========================================================================
FreeSpace version: 3.6.12
Passed cmdline options:
  -spec_exp 16.7
  -spec_static 0.9
  -spec_point 0.6
  -spec_tube 1
  -ambient_factor 35
  -env
  -mipmap
  -missile_lighting
  -glow
  -nomotiondebris
  -noscalevid
  -spec
  -no_emissive_light
  -normal
  -3dshockwave
  -post_process
  -bloom_intensity 200
  -cache_bitmaps
  -orbradar
  -rearm_timer
  -3dwarp
  -ship_choice_3d
  -warp_flash
  -snd_preload
  -mod mediavps
Building file index...
Found root pack 'C:\freespace\mediavps\MV_Advanced.vp' with a checksum of 0x08a62d20
Found root pack 'C:\freespace\mediavps\MV_Assets.vp' with a checksum of 0xb8c5d655
Found root pack 'C:\freespace\mediavps\MV_Core.vp' with a checksum of 0x0a0213e0
Found root pack 'C:\freespace\mediavps\MV_Effects.vp' with a checksum of 0xb2296226
Found root pack 'C:\freespace\mediavps\mv_music.vp' with a checksum of 0xbbd92e16
Found root pack 'C:\freespace\FS2OGGcutscenepack.vp' with a checksum of 0x84396e99
Found root pack 'C:\freespace\multi-mission-pack.vp' with a checksum of 0x377695e0
Found root pack 'C:\freespace\multi-voice-pack.vp' with a checksum of 0xd50e7442
Found root pack 'C:\freespace\root_fs2.vp' with a checksum of 0xce10d76c
Found root pack 'C:\freespace\smarty_fs2.vp' with a checksum of 0xddeb3b1e
Found root pack 'C:\freespace\sparky_fs2.vp' with a checksum of 0x164fe65a
Found root pack 'C:\freespace\sparky_hi_fs2.vp' with a checksum of 0xa11d56f1
Found root pack 'C:\freespace\stu_fs2.vp' with a checksum of 0xd77da83a
Found root pack 'C:\freespace\tango1_fs2.vp' with a checksum of 0x4c25221e
Found root pack 'C:\freespace\tango2_fs2.vp' with a checksum of 0x86920b82
Found root pack 'C:\freespace\tango3_fs2.vp' with a checksum of 0x705e8d71
Found root pack 'C:\freespace\warble_fs2.vp' with a checksum of 0xd85c305d
Searching root 'C:\freespace\mediavps\' ... 163 files
Searching root pack 'C:\freespace\mediavps\MV_Advanced.vp' ... 2610 files
Searching root pack 'C:\freespace\mediavps\MV_Assets.vp' ... 1867 files
Searching root pack 'C:\freespace\mediavps\MV_Core.vp' ... 139 files
Searching root pack 'C:\freespace\mediavps\MV_Effects.vp' ... 1032 files
Searching root pack 'C:\freespace\mediavps\mv_music.vp' ... 32 files
Searching root 'C:\freespace\' ... 14 files
Searching root pack 'C:\freespace\FS2OGGcutscenepack.vp' ... 10 files
Searching root pack 'C:\freespace\multi-mission-pack.vp' ... 110 files
Searching root pack 'C:\freespace\multi-voice-pack.vp' ... 307 files
Searching root pack 'C:\freespace\root_fs2.vp' ... 157 files
Searching root pack 'C:\freespace\smarty_fs2.vp' ... 10 files
Searching root pack 'C:\freespace\sparky_fs2.vp' ... 3027 files
Searching root pack 'C:\freespace\sparky_hi_fs2.vp' ... 1337 files
Searching root pack 'C:\freespace\stu_fs2.vp' ... 2355 files
Searching root pack 'C:\freespace\tango1_fs2.vp' ... 32 files
Searching root pack 'C:\freespace\tango2_fs2.vp' ... 15 files
Searching root pack 'C:\freespace\tango3_fs2.vp' ... 10 files
Searching root pack 'C:\freespace\warble_fs2.vp' ... 52 files
Found 19 roots and 13279 files.
AutoLang: Language auto-detection successful...
Setting language to English
TBM  =>  Starting parse of 'mv_strings-lcl.tbm' ...
Initializing OpenAL...
  Using 'Generic Software' as OpenAL sound device...
  OpenAL Vendor     : Creative Labs Inc.
  OpenAL Renderer   : Software
  OpenAL Version    : 1.1

... OpenAL successfully initialized!
Initializing OpenGL graphics device at 1680x1050 with 32-bit color...
  Initializing WGL...
  Requested WGL Video values = R: 8, G: 8, B: 8, depth: 32, double-buffer: 1
  Actual WGL Video values    = R: 8, G: 8, B: 8, depth: 32, double-buffer: 1
  OpenGL Vendor     : NVIDIA Corporation
  OpenGL Renderer   : GeForce GTX 260M/PCI/SSE2
  OpenGL Version    : 3.0.0

  Using extension "GL_EXT_fog_coord".
  Using extension "GL_ARB_multitexture".
  Using extension "GL_ARB_texture_env_add".
  Using extension "GL_ARB_texture_compression".
  Using extension "GL_EXT_texture_compression_s3tc".
  Using extension "GL_EXT_texture_filter_anisotropic".
  Using extension "GL_ARB_texture_env_combine".
  Using extension "GL_EXT_compiled_vertex_array".
  Using extension "GL_EXT_draw_range_elements".
  Using extension "GL_ARB_texture_mirrored_repeat".
  Using extension "GL_ARB_texture_non_power_of_two".
  Using extension "GL_ARB_vertex_buffer_object".
  Using extension "GL_ARB_pixel_buffer_object".
  Using extension "GL_SGIS_generate_mipmap".
  Using extension "GL_EXT_framebuffer_object".
  Using extension "GL_ARB_texture_rectangle".
  Using extension "GL_EXT_bgra".
  Using extension "GL_ARB_texture_cube_map".
  Using extension "GL_EXT_texture_lod_bias".
  Using extension "GL_ARB_point_sprite".
  Using extension "GL_ARB_shading_language_100".
  Using extension "GL_ARB_shader_objects".
  Using extension "GL_ARB_vertex_shader".
  Using extension "GL_ARB_fragment_shader".
  Using extension "GL_NV_vertex_program3".
  Found special extension function "wglSwapIntervalEXT".

  Initializing Shaders Manager...
  Loading and compiling main shaders...
    Compiling main shader ->  main-v.sdr (null-v.sdr) / main-f.sdr (null-f.sdr) ...
    Compiling main shader ->  main-v.sdr (b-v.sdr) / main-f.sdr (b-f.sdr) ...
    Compiling main shader ->  main-v.sdr (b-v.sdr) / main-f.sdr (bg-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (lb-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (lbg-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (lbgs-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (lbs-f.sdr) ...
    Compiling main shader ->  main-v.sdr (le-v.sdr) / main-f.sdr (lbgse-f.sdr) ...
    Compiling main shader ->  main-v.sdr (le-v.sdr) / main-f.sdr (lbse-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (lbgn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (lbgsn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (lbn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (lbsn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lne-v.sdr) / main-f.sdr (lbgsne-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lne-v.sdr) / main-f.sdr (lbsne-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lf-v.sdr) / main-f.sdr (lfb-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lf-v.sdr) / main-f.sdr (lfbg-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lf-v.sdr) / main-f.sdr (lfbgs-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lf-v.sdr) / main-f.sdr (lfbs-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfe-v.sdr) / main-f.sdr (lfbgse-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfe-v.sdr) / main-f.sdr (lfbse-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfn-v.sdr) / main-f.sdr (lfbgn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfn-v.sdr) / main-f.sdr (lfbgsn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfn-v.sdr) / main-f.sdr (lfbn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfn-v.sdr) / main-f.sdr (lfbsn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfne-v.sdr) / main-f.sdr (lfbgsne-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lfne-v.sdr) / main-f.sdr (lfbsne-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (null-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (lg-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (lgs-f.sdr) ...
    Compiling main shader ->  main-v.sdr (l-v.sdr) / main-f.sdr (ls-f.sdr) ...
    Compiling main shader ->  main-v.sdr (le-v.sdr) / main-f.sdr (lgse-f.sdr) ...
    Compiling main shader ->  main-v.sdr (le-v.sdr) / main-f.sdr (lse-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (lgn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (lgsn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (ln-f.sdr) ...
    Compiling main shader ->  main-v.sdr (ln-v.sdr) / main-f.sdr (lsn-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lne-v.sdr) / main-f.sdr (lgsne-f.sdr) ...
    Compiling main shader ->  main-v.sdr (lne-v.sdr) / main-f.sdr (lsne-f.sdr) ...
  Shaders Manager initialized.

  Max texture units: 4 (32)
  Max elements vertices: 1048576
  Max elements indices: 1048576
  Max texture size: 8192x8192
  Can use compressed textures: YES
  Texture compression available: YES
  Using trilinear texture filter.
  Using GLSL for model rendering.
  Shader Version: 1.30 NVIDIA via Cg compiler
... OpenGL init is complete!
Size of bitmap info = 760 KB
Size of bitmap extra info = 52 bytes
ANI cursorweb with size 24x24 (25.0% wasted)
GRAPHICS: Initializing default colors...
SCRIPTING: Beginning initialization sequence...
SCRIPTING: Beginning Lua initialization...
LUA: Opening LUA state...
LUA: Initializing base Lua libraries...
LUA: Beginning ADE initialization
ADE: Initializing enumeration constants...
ADE: Assigning Lua session...
SCRIPTING: Beginning main hook parse sequence....
Wokka!  Error opening file (scripting.tbl)!
TABLES: Unable to parse 'scripting.tbl'!  Error code = 5.
SCRIPTING: Inititialization complete.
SCRIPTING: Splash screen overrides checked
SCRIPTING: Splash hook has been run
SCRIPTING: Splash screen conditional hook has been run
Using high memory settings...
Post-processing table not found.  Disabling...
Wokka!  Error opening file (interface.tbl)!
WMCGUI: Unable to parse 'interface.tbl'!  Error code = 5.
TBM  =>  Starting parse of 'mv_effects-sdf.tbm' ...
TBM  =>  Starting parse of 'mv_adveffects-sdf.tbm' ...
ANI 2_radar1 with size 209x170 (33.6% wasted)
Windows reported 16 joysticks, we found 0
Current soundtrack set to -1 in event_music_reset_choices
TBM  =>  Starting parse of 'mv_music-mus.tbm' ...
TBM  =>  Starting parse of 'mv_advmuzzle-mfl.tbm' ...
Wokka!  Error opening file (armor.tbl)!
TABLES: Unable to parse 'armor.tbl'!  Error code = 5.
TBM  =>  Starting parse of 'mv_effects-wxp.tbm' ...
TBM  =>  Starting parse of 'mv_adveffects-wxp.tbm' ...
BMPMAN: Found EFF (exp20.eff) with 64 frames at 35 fps.
BMPMAN: Found EFF (ExpMissileHit1.eff) with 44 frames at 30 fps.
BMPMAN: Found EFF (exp05.eff) with 47 frames at 20 fps.
BMPMAN: Found EFF (exp06.eff) with 48 frames at 20 fps.
BMPMAN: Found EFF (exp04.eff) with 60 frames at 20 fps.
BMPMAN: Found EFF (Maxim_Impact.eff) with 23 frames at 30 fps.
ANI Lamprey_Impact with size 80x80 (37.5% wasted)
BMPMAN: Found EFF (Gmuzzle.eff) with 5 frames at 30 fps.
BMPMAN: Found EFF (PWmuzzle.eff) with 4 frames at 30 fps.
BMPMAN: Found EFF (Rmuzzle.eff) with 4 frames at 30 fps.
BMPMAN: Found EFF (Bmuzzle.eff) with 5 frames at 30 fps.
TBM  =>  Starting parse of 'mv_effects-wep.tbm' ...
TBM  =>  Starting parse of 'mv_tech-wep.tbm' ...
TBM  =>  Starting parse of 'mv_models-wep.tbm' ...
TBM  =>  Starting parse of 'mv_adveffects-wep.tbm' ...
TBM  =>  Starting parse of 'mv_trails-shp.tbm' ...
TBM  =>  Starting parse of 'mv_tech-shp.tbm' ...
TBM  =>  Starting parse of 'mv_dragon-shp.tbm' ...
TBM  =>  Starting parse of 'mv_models-shp.tbm' ...
TBM  =>  Starting parse of 'mv_adveffects-shp.tbm' ...
TBM  =>  Starting parse of 'mv_escort-hdg.tbm' ...
TBM  =>  Starting parse of 'mv_effects-str.tbm' ...
loading animated cursor "cursor"
ANI cursor with size 24x24 (25.0% wasted)
Ships.tbl is : VALID
Weapons.tbl is : VALID
cfile_init() took 393
Got event GS_EVENT_GAME_INIT (49) in state NOT A VALID STATE (0)
ANI cursor.ani with size 24x24 (25.0% wasted)
Got event GS_EVENT_MAIN_MENU (0) in state GS_STATE_INITIAL_PLAYER_SELECT (37)
Someone passed an extension to bm_load for file 'hammer1.pcx'
ANI 2_mainwalk.ani with size 209x477 (6.8% wasted)
ANI 2_mainflyby.ani with size 509x189 (26.2% wasted)
ANI 2_maincrane.ani with size 192x116 (9.4% wasted)
ANI 2_mainexit.ani with size 319x174 (32.0% wasted)
ANI 2_mainbarracks.ani with size 273x158 (38.3% wasted)
ANI 2_mainreadyroom.ani with size 231x145 (43.4% wasted)
ANI 2_maintechroom.ani with size 69x119 (7.0% wasted)
ANI 2_mainoptions.ani with size 337x206 (19.5% wasted)
ANI 2_maincampaign.ani with size 308x190 (25.8% wasted)
Got event GS_EVENT_TECH_MENU (11) in state GS_STATE_MAIN_MENU (1)
Techroom successfully initialized, now changing tab...
Loading model 'fighter01.pof'
IBX: Found a good IBX/TSB to read for 'fighter01.pof'.
IBX-DEBUG => POF checksum: 0x2a94b7b8, IBX checksum: 0x38c2bcca -- "fighter01.pof"
Frame  0 too long!!: frametime = 0.942 (0.942)
Frame  0 too long!!: frametime = 0.275 (0.275)
Got event GS_EVENT_MAIN_MENU (0) in state GS_STATE_TECH_MENU (7)
Freeing all existing models...
Got event GS_EVENT_NEW_CAMPAIGN (26) in state GS_STATE_MAIN_MENU (1)
Got event GS_EVENT_START_GAME (1) in state GS_STATE_MAIN_MENU (1)
=================== STARTING LEVEL LOAD ==================
Reassigning player to squadron 53rd Hammerheads
Someone passed an extension to bm_load for file 'hammer1.pcx'
ANI 2_Loading with size 824x43 (32.8% wasted)
ANI 2_Loading.ani with size 824x43 (32.8% wasted)
Starting model page in...
Beginning level bitmap paging...
BMPMAN: Found EFF (particleexp01.eff) with 10 frames at 8 fps.
BMPMAN: Found EFF (particlesmoke01.eff) with 88 frames at 30 fps.
BMPMAN: Found EFF (particlesmoke02.eff) with 39 frames at 24 fps.
TBM  =>  Starting parse of 'mv_fireball-fbl.tbm' ...
TBM  =>  Starting parse of 'mv_adveffects-fbl.tbm' ...
BMPMAN: Found EFF (WarpMap01.eff) with 30 frames at 30 fps.
BMPMAN: Found EFF (WarpMap02.eff) with 30 frames at 30 fps.
BMPMAN: Found EFF (rock_exp.eff) with 55 frames at 30 fps.
Loading warp model
Loading model 'warp.pof'
IBX: Found a good IBX/TSB to read for 'warp.pof'.
IBX-DEBUG => POF checksum: 0x3c5e73c9, IBX checksum: 0xc04d2c9d -- "warp.pof"
Model warp.pof has a null moment of inertia!  (This is only a problem if the model is a ship.)
 600
BMPMAN: Found EFF (shieldhit01a.eff) with 23 frames at 21 fps.
BMPMAN: Found EFF (shieldhit02a.eff) with 45 frames at 30 fps.
BMPMAN: Found EFF (shieldhit03a.eff) with 22 frames at 30 fps.
SHOCKWAVE =>  Loading default shockwave model...
Loading model 'shockwave.pof'
IBX: Found a good IBX/TSB to read for 'shockwave.pof'.
IBX-DEBUG => POF checksum: 0xd8be5fd9, IBX checksum: 0x208fb934 -- "shockwave.pof"
BMPMAN: Found EFF (shockwave3d-glow.eff) with 159 frames at 24 fps.
Model shockwave.pof has a null moment of inertia!  (This is only a problem if the model is a ship.)
SHOCKWAVE =>  Default model load: SUCCEEDED!!
MISSION LOAD: 'Training-1.fs2'
Hmmm... Extension passed to mission_load...
Reassigning player to squadron 53rd Hammerheads
Someone passed an extension to bm_load for file 'hammer1.pcx'
Starting mission message count : 205
Ending mission message count : 242
Current soundtrack set to -1 in event_music_reset_choices
Current soundtrack set to -1 in event_music_set_soundtrack
Loading model 'fighter2t-05.pof'
IBX: Found a good IBX/TSB to read for 'fighter2t-05.pof'.
IBX-DEBUG => POF checksum: 0xa59230ad, IBX checksum: 0xb499bcbf -- "fighter2t-05.pof"
Allocating space for at least 5 new ship subsystems ...  a total of 200 is now available (5 in-use).
Loading model 'Drone01.pof'
IBX: Found a good IBX/TSB to read for 'Drone01.pof'.
IBX-DEBUG => POF checksum: 0xd98f0c89, IBX checksum: 0xabcb22fd -- "Drone01.pof"
OpenGL: Created 512x512 FBO!
ANI 2_lock1 with size 56x53 (17.2% wasted)
ANI 2_lockspin with size 100x100 (21.9% wasted)
ANI 2_lead1 with size 26x26 (18.8% wasted)
ANI 2_energy2 with size 86x96 (25.0% wasted)
ANI toggle1 with size 57x20 (37.5% wasted)
ANI weapons1 with size 126x20 (37.5% wasted)
ANI weapons1_b with size 150x20 (37.5% wasted)
ANI 2_toparc1 with size 252x60 (6.3% wasted)
ANI 2_toparc2 with size 35x24 (25.0% wasted)
ANI 2_toparc3 with size 41x29 (9.4% wasted)
ANI 2_leftarc with size 103x252 (1.6% wasted)
ANI 2_rightarc1 with size 103x252 (1.6% wasted)
ANI 2_reticle1 with size 40x24 (25.0% wasted)
ANI targhit1 with size 31x21 (34.4% wasted)
ANI energy1 with size 12x41 (35.9% wasted)
ANI targetview1 with size 137x156 (39.1% wasted)
ANI targetview2 with size 4x96 (25.0% wasted)
ANI targetview3 with size 7x20 (37.5% wasted)
ANI damage1 with size 148x25 (21.9% wasted)
ANI support1 with size 108x24 (25.0% wasted)
ANI objective1 with size 149x21 (34.4% wasted)
ANI wingman1 with size 71x53 (17.2% wasted)
ANI wingman2 with size 35x53 (17.2% wasted)
ANI wingman3 with size 14x53 (17.2% wasted)
ANI netlag1 with size 29x30 (6.3% wasted)
ANI head1 with size 164x132 (48.4% wasted)
ANI time1 with size 47x23 (28.1% wasted)
Loading model 'Starfield.pof'
IBX: Found a good IBX/TSB to read for 'Starfield.pof'.
IBX-DEBUG => POF checksum: 0x07d8680d, IBX checksum: 0x3d22d0e6 -- "Starfield.pof"
Model Starfield.pof has a null moment of inertia!  (This is only a problem if the model is a ship.)
=================== STARTING LEVEL DATA LOAD ==================
Loading model 'support2t-01.pof'
IBX: Found a good IBX/TSB to read for 'support2t-01.pof'.
IBX-DEBUG => POF checksum: 0xd9688f1e, IBX checksum: 0x450d963a -- "support2t-01.pof"
Loading model 'support2v-01.pof'
IBX: Found a good IBX/TSB to read for 'support2v-01.pof'.
IBX-DEBUG => POF checksum: 0x976f69e0, IBX checksum: 0x4e18f7cd -- "support2v-01.pof"
About to page in ships!
ANI shieldft-05 with size 112x93 (27.3% wasted)
BMPMAN: Found EFF (Subach_AniBitmap.eff) with 6 frames at 5 fps.
BMPMAN: Found EFF (PrometheusR_AniBitmap.eff) with 12 frames at 5 fps.
Loading model 'rockeye.pof'
IBX: Found a good IBX/TSB to read for 'rockeye.pof'.
IBX-DEBUG => POF checksum: 0x25ff4c7f, IBX checksum: 0x541aef89 -- "rockeye.pof"
Loading model 'Tempest.pof'
IBX: Found a good IBX/TSB to read for 'Tempest.pof'.
IBX-DEBUG => POF checksum: 0x33e3ab29, IBX checksum: 0x1d791899 -- "Tempest.pof"
Model Tempest.pof has a null moment of inertia!  (This is only a problem if the model is a ship.)
Loading model 'bombardier.pof'
IBX: Found a good IBX/TSB to read for 'bombardier.pof'.
IBX-DEBUG => POF checksum: 0x03e1b208, IBX checksum: 0x5def0a77 -- "bombardier.pof"
Loading model 'cmeasure01.pof'
IBX: Found a good IBX/TSB to read for 'cmeasure01.pof'.
IBX-DEBUG => POF checksum: 0x54c44f1a, IBX checksum: 0x008d0a11 -- "cmeasure01.pof"
Model cmeasure01.pof has a null moment of inertia!  (This is only a problem if the model is a ship.)
Loading model 'debris01.pof'
IBX: Found a good IBX/TSB to read for 'debris01.pof'.
IBX-DEBUG => POF checksum: 0x974f214b, IBX checksum: 0x368eb490 -- "debris01.pof"
Loading model 'debris02.pof'
IBX: Found a good IBX/TSB to read for 'debris02.pof'.
IBX-DEBUG => POF checksum: 0x8e0eed50, IBX checksum: 0x7b2a747e -- "debris02.pof"
Paging in mission messages
Stopping model page in...
ANI 2_radar1.ani with size 209x170 (33.6% wasted)
ANI 2_Loading.ani with size 824x43 (32.8% wasted)
ANI 2_lock1.ani with size 56x53 (17.2% wasted)
ANI 2_lead1.ani with size 26x26 (18.8% wasted)
ANI 2_energy2.ani with size 86x96 (25.0% wasted)
ANI toggle1.ani with size 57x20 (37.5% wasted)
ANI weapons1.ani with size 126x20 (37.5% wasted)
ANI 2_toparc1.ani with size 252x60 (6.3% wasted)
ANI 2_toparc2.ani with size 35x24 (25.0% wasted)
ANI 2_toparc3.ani with size 41x29 (9.4% wasted)
ANI 2_leftarc.ani with size 103x252 (1.6% wasted)
ANI 2_rightarc1.ani with size 103x252 (1.6% wasted)
ANI 2_reticle1.ani with size 40x24 (25.0% wasted)
ANI targhit1.ani with size 31x21 (34.4% wasted)
ANI energy1.ani with size 12x41 (35.9% wasted)
ANI targetview1.ani with size 137x156 (39.1% wasted)
ANI targetview2.ani with size 4x96 (25.0% wasted)
ANI targetview3.ani with size 7x20 (37.5% wasted)
ANI damage1.ani with size 148x25 (21.9% wasted)
ANI support1.ani with size 108x24 (25.0% wasted)
ANI objective1.ani with size 149x21 (34.4% wasted)
ANI wingman1.ani with size 71x53 (17.2% wasted)
ANI wingman2.ani with size 35x53 (17.2% wasted)
ANI wingman3.ani with size 14x53 (17.2% wasted)
ANI netlag1.ani with size 29x30 (6.3% wasted)
ANI head1.ani with size 164x132 (48.4% wasted)
ANI time1.ani with size 47x23 (28.1% wasted)
ANI shieldft-05.ani with size 112x93 (27.3% wasted)
User bitmap 'TMP308x190+16'
User bitmap 'TMP337x206+16'
User bitmap 'TMP69x119+16'
User bitmap 'TMP231x145+16'
User bitmap 'TMP273x158+16'
User bitmap 'TMP319x174+16'
User bitmap 'TMP192x116+16'
User bitmap 'TMP509x189+16'
User bitmap 'TMP209x477+16'
User bitmap 'TMP308x190+16'
User bitmap 'TMP337x206+16'
User bitmap 'TMP69x119+16'
User bitmap 'TMP231x145+16'
User bitmap 'TMP273x158+16'
User bitmap 'TMP319x174+16'
User bitmap 'TMP192x116+16'
User bitmap 'TMP509x189+16'
User bitmap 'TMP209x477+16'
User bitmap 'TMP256x256+8'
User bitmap 'TMP256x256+8'
User bitmap 'TMP128x128+8'
Bmpman: 1253/4750 bitmap slots in use.
Ending level bitmap paging...
=================== ENDING LOAD ================
Real count = 353,  Estimated count = 425
================================================
Received post for event GS_EVENT_CMD_BRIEF during state transtition. Find Allender if you are unsure if this is bad.
Got event GS_EVENT_CMD_BRIEF (55) in state GS_STATE_START_GAME (52)
ANI cb_train-01_a.ani with size 440x200 (21.9% wasted)
Frame  0 too long!!: frametime = 14.639 (14.639)
Got event GS_EVENT_START_BRIEFING (15) in state GS_STATE_CMD_BRIEF (43)
ANI 2_BriefMap with size 918x400 (21.9% wasted)
ANI iconwing01 with size 32x28 (12.5% wasted)
ANI iconSD4 with size 56x24 (25.0% wasted)
ANI iconT-fighter with size 24x29 (9.4% wasted)
ANI FadeiconT-fighter with size 24x29 (9.4% wasted)
ANI FadeiconT-fighter.ani with size 24x29 (9.4% wasted)
Frame  0 too long!!: frametime = 0.367 (0.367)
ANI iconT-fighter.ani with size 24x29 (9.4% wasted)
Got event GS_EVENT_ENTER_GAME (2) in state GS_STATE_BRIEFING (10)
Entering game at time =  27.775
1783 frames executed in  30.015 seconds,  59.404 frames per second.
Got event GS_EVENT_END_GAME (4) in state GS_STATE_GAME_PLAY (2)
Unloading in mission messages
Got event GS_EVENT_QUIT_GAME (5) in state GS_STATE_MAIN_MENU (1)
Freeing all existing models...
... Log closed, Sat Apr 17 09:24:48 2010

Up to about 30 seconds of gameplay. First mission of the mediavp main campaign. No other mods.

[FUBAR-BDHR]

Post-processing table not found.  Disabling...

I guess you didn't get the post processing files. 

[Jeff Vader]

Also,

Code: [Select]

Searching root pack 'C:\freespace\mediavps\MV_Advanced.vp' ... 2610 files
Searching root pack 'C:\freespace\mediavps\MV_Assets.vp' ... 1867 files
Searching root pack 'C:\freespace\mediavps\MV_Core.vp' ... 139 files
Searching root pack 'C:\freespace\mediavps\MV_Effects.vp' ... 1032 files
You seem to have the older incarnation of the 3.6.10 MediaVPs. Please download the current ones (including the patch!) from the release thread.

If I recall correctly, MV_Music.vp hasn't changed, though, so you don't need to redownload that.

[Enioch]

I guess you didn't get the post processing files. 

I got the sdrs and the post-processing tbl. I did say that I do get post-processing out of RC1, so I must have the required files, don't I? They just don't work with RC2

Also,
You seem to have the older incarnation of the 3.6.10 MediaVPs. Please download the current ones (including the patch!) from the release thread.
If I recall correctly, MV_Music.vp hasn't changed, though, so you don't need to redownload that.

OK, downloading now. Still, I doubt that is the issue. 

Thanks anyways!