Hard Light Productions Forums

Hosted Projects - Standalone => Diaspora => Diaspora Tech Help => Topic started by: risbosix on September 09, 2012, 12:28:43 pm

Title: Axis issue
Post by: risbosix on September 09, 2012, 12:28:43 pm

Hello,

i have this Joy http://brain.pan.e-merchant.com/7/2/03354427/g_03354427.jpg

I want to use the third axis of my joystick to "bank axis" but it doesn't work, everything is ok in the "control config" menu, but in game the rudder doesn't work

Hope you will understand ^^

Title: Re: Axis issue
Post by: karajorma on September 09, 2012, 06:47:58 pm

Have you actually tried binding the axis yet? What happens if you do?

Title: Re: Axis issue
Post by: risbosix on September 10, 2012, 05:28:55 am

It bind, but doesn't have any effect in game

Title: Re: Axis issue
Post by: Al-Rik on September 10, 2012, 02:08:18 pm

Do you tried to bind the twist handle, or the lever in the throttle ?

I used this Joystick, and it worked well in Freespace SCP...
Check the manual about the axis settings, IIRC there is a 4 and 5 axis setting (and it's even possible to switch axis and buttons - maybe you have to reset that ).

Title: Re: Axis issue
Post by: newman on September 10, 2012, 03:32:39 pm

I used to play with that stick, in fact I still have it around somewhere. Twist axis worked just fine with Diaspora, if I remember correctly that stick had a switch on it that defined whether you wanted to use the twist axis or buttons on the back of the throttle for rolling the craft. Make sure that switch is in the correct position - beyond that, it worked just fine for me.

Title: Re: Axis issue
Post by: risbosix on September 11, 2012, 07:57:49 am

Thank you for the reply, i want to use the lever it's much easier than the twist, i'll check that tonight