Hard Light Productions Forums
Hosted Projects - FS2 Required => Blue Planet => Topic started by: hardcorecrush on April 13, 2013, 10:57:29 pm
-
I have been trying to run with the 3.6.12 Inferno build and the 3.6.18, neither of the has started successfully.
I have posted my fs2_open.log below:
==========================================================================
DEBUG SPEW: No debug_filter.cfg found, so only general, error, and warning
categories can be shown and no debug_filter.cfg info will be saved.
==========================================================================
FreeSpace version: 3.6.12
Passed cmdline options:
-ballistic_gauge
-dualscanlines
-orbradar
-rearm_timer
-targetinfo
-3dwarp
-ship_choice_3d
-weapon_choice_3d
-warp_flash
-mod blueplanet
Building file index...
Found root pack 'D:\Games\FreeSpace2\blueplanet\adv-bp.vp' with a checksum of 0x07c8f9a5
Found root pack 'D:\Games\FreeSpace2\blueplanet\bp-audio1.vp' with a checksum of 0x58f866a1
Found root pack 'D:\Games\FreeSpace2\blueplanet\bp-audio2.vp' with a checksum of 0x213dcdf3
Found root pack 'D:\Games\FreeSpace2\blueplanet\bp-core.vp' with a checksum of 0x099138b1
Found root pack 'D:\Games\FreeSpace2\blueplanet\bp-visuals1.vp' with a checksum of 0x1604e6d1
Found root pack 'D:\Games\FreeSpace2\blueplanet\bp-visuals2.vp' with a checksum of 0xcb7237b9
Found root pack 'D:\Games\FreeSpace2\Root_fs2.vp' with a checksum of 0x747372cc
Found root pack 'D:\Games\FreeSpace2\smarty_fs2.vp' with a checksum of 0xddeb3b1e
Found root pack 'D:\Games\FreeSpace2\sparky_fs2.vp' with a checksum of 0x164fe65a
Found root pack 'D:\Games\FreeSpace2\sparky_hi_fs2.vp' with a checksum of 0xa11d56f1
Found root pack 'D:\Games\FreeSpace2\stu_fs2.vp' with a checksum of 0xd77da83a
Found root pack 'D:\Games\FreeSpace2\tango1_fs2.vp' with a checksum of 0x4c25221e
Found root pack 'D:\Games\FreeSpace2\tango2_fs2.vp' with a checksum of 0x86920b82
Found root pack 'D:\Games\FreeSpace2\tango3_fs2.vp' with a checksum of 0x705e8d71
Found root pack 'D:\Games\FreeSpace2\warble_fs2.vp' with a checksum of 0xd85c305d
Found root pack 'g:\tango1_fs2.vp' with a checksum of 0x4c25221e
Found root pack 'g:\tangoA_fs2.vp' with a checksum of 0x2e10c984
Found root pack 'g:\warble_fs2.vp' with a checksum of 0xd85c305d
Searching root 'D:\Games\FreeSpace2\blueplanet\' ... 2 files
Searching root pack 'D:\Games\FreeSpace2\blueplanet\adv-bp.vp' ... 358 files
Searching root pack 'D:\Games\FreeSpace2\blueplanet\bp-audio1.vp' ... 41 files
Searching root pack 'D:\Games\FreeSpace2\blueplanet\bp-audio2.vp' ... 683 files
Searching root pack 'D:\Games\FreeSpace2\blueplanet\bp-core.vp' ... 47 files
Searching root pack 'D:\Games\FreeSpace2\blueplanet\bp-visuals1.vp' ... 363 files
Searching root pack 'D:\Games\FreeSpace2\blueplanet\bp-visuals2.vp' ... 1561 files
Searching root 'D:\Games\FreeSpace2\' ... 8 files
Searching root pack 'D:\Games\FreeSpace2\Root_fs2.vp' ... 157 files
Searching root pack 'D:\Games\FreeSpace2\smarty_fs2.vp' ... 10 files
Searching root pack 'D:\Games\FreeSpace2\sparky_fs2.vp' ... 3027 files
Searching root pack 'D:\Games\FreeSpace2\sparky_hi_fs2.vp' ... 1337 files
Searching root pack 'D:\Games\FreeSpace2\stu_fs2.vp' ... 2355 files
Searching root pack 'D:\Games\FreeSpace2\tango1_fs2.vp' ... 32 files
Searching root pack 'D:\Games\FreeSpace2\tango2_fs2.vp' ... 15 files
Searching root pack 'D:\Games\FreeSpace2\tango3_fs2.vp' ... 10 files
Searching root pack 'D:\Games\FreeSpace2\warble_fs2.vp' ... 52 files
Searching root 'g:\' ... 3 files
Searching root pack 'g:\tango1_fs2.vp' ... 32 files
Searching root pack 'g:\tangoA_fs2.vp' ... 0 files
Searching root pack 'g:\warble_fs2.vp' ... 52 files
Found 21 roots and 10145 files.
AutoLang: Language auto-detection successful...
Setting language to English
Initializing OpenAL...
Using 'Generic Software' as OpenAL sound device...
OpenAL Vendor : Creative Labs Inc.
OpenAL Renderer : Software
OpenAL Version : 1.1
... OpenAL successfully initialized!
Initializing OpenGL graphics device at 640x480 with 16-bit color...
Initializing WGL...
Requested WGL Video values = R: 5, G: 6, B: 5, depth: 16, double-buffer: 1
Actual WGL Video values = R: 8, G: 8, B: 8, depth: 32, double-buffer: 1
OpenGL Vendor : Intel
OpenGL Renderer : Intel(R) HD Graphics 3000
OpenGL Version : 3.1.0 - Build 9.17.10.2932
Using extension "GL_EXT_fog_coord".
Using extension "GL_ARB_multitexture".
Using extension "GL_ARB_texture_env_add".
Using extension "GL_ARB_texture_compression".
Using extension "GL_EXT_texture_compression_s3tc".
Using extension "GL_EXT_texture_filter_anisotropic".
Using extension "GL_ARB_texture_env_combine".
Using extension "GL_EXT_compiled_vertex_array".
Using extension "GL_EXT_draw_range_elements".
Unable to find extension "GL_ARB_texture_mirrored_repeat".
Using extension "GL_ARB_texture_non_power_of_two".
Using extension "GL_ARB_vertex_buffer_object".
Using extension "GL_ARB_pixel_buffer_object".
Using extension "GL_SGIS_generate_mipmap".
Using extension "GL_EXT_framebuffer_object".
Using extension "GL_ARB_texture_rectangle".
Using extension "GL_EXT_bgra".
Using extension "GL_ARB_texture_cube_map".
Using extension "GL_EXT_texture_lod_bias".
Using extension "GL_ARB_point_sprite".
Using extension "GL_ARB_shading_language_100".
Using extension "GL_ARB_shader_objects".
Using extension "GL_ARB_vertex_shader".
Using extension "GL_ARB_fragment_shader".
Unable to find extension "GL_ATI_shader_texture_lod".
Found special extension function "wglSwapIntervalEXT".
Max texture units: 8 (8)
Max elements vertices: 1200
Max elements indices: 1200
Max texture size: 8192x8192
Can use compressed textures: YES
Texture compression available: YES
Using trilinear texture filter.
... OpenGL init is complete!
Size of bitmap info = 760 KB
Size of bitmap extra info = 52 bytes
ANI cursorweb with size 24x24 (25.0% wasted)
GRAPHICS: Initializing default colors...
SCRIPTING: Beginning initialization sequence...
SCRIPTING: Beginning Lua initialization...
LUA: Opening LUA state...
LUA: Initializing base Lua libraries...
LUA: Beginning ADE initialization
ADE: Initializing enumeration constants...
ADE: Assigning Lua session...
SCRIPTING: Beginning main hook parse sequence....
Wokka! Error opening file (scripting.tbl)!
TABLES: Unable to parse 'scripting.tbl'! Error code = 5.
SCRIPTING: Inititialization complete.
SCRIPTING: Splash screen overrides checked
SCRIPTING: Splash hook has been run
SCRIPTING: Splash screen conditional hook has been run
Using high memory settings...
Wokka! Error opening file (interface.tbl)!
WMCGUI: Unable to parse 'interface.tbl'! Error code = 5.
TBM => Starting parse of 'bp-sdf.tbm' ...
ANI radar1 with size 130x106 (17.2% wasted)
Windows reported 16 joysticks, we found 0
Current soundtrack set to -1 in event_music_reset_choices
TBM => Starting parse of 'bp-mus.tbm' ...
TBM => Starting parse of 'bp-mfl.tbm' ...
Wokka! Error opening file (armor.tbl)!
TABLES: Unable to parse 'armor.tbl'! Error code = 5.
TBM => Starting parse of 'bp-wxp.tbm' ...
BMPMAN: Found EFF (explo3.eff) with 48 frames at 22 fps.
BMPMAN: Found EFF (HFlakExp.eff) with 48 frames at 22 fps.
BMPMAN: Found EFF (exp06b.eff) with 92 frames at 22 fps.
BMPMAN: Found EFF (bomb_flare.eff) with 69 frames at 20 fps.
TBM => Starting parse of 'bp-wep.tbm' ...
WARNING: "Weapon explosion 'MS_Impact' does not have an LOD0 anim!" at weapons.cpp:180
Freeing all existing models...
-
Thanks for posting the fs2_open.log :)
You need to use either a custom BP build, or the BP compatibility package with a recent nightly build. Neither 3.6.12 or 3.6.18 are supported with BP.
Given that you've got an Intel video card, I'd recommend using the BP compatibility package (stickied in this forum) and recent nightly (in the SCP nightly builds forum). And, you also need to get the mediavps_3612 for BP to work.
-
Correct, you cannot run the game using 3.6.12 or 3.6.18 as neither of them has the features required to handle BP. And as niffiwan said, since your hardware is below minimum spec for the standard BP build that came with the installation, you'll need to follow the steps below -
Grab both the compatibility packages from this thread http://www.hard-light.net/forums/index.php?topic=83606.0
and a recent nightly build from here http://www.hard-light.net/forums/index.php?board=173.0
edit: Also, there is a HUGE problem in that log:
There is no mod.ini in the Blue Planet folder, or you've done something to prevent it from reading correctly. You MUST have the 3.6.12 MediaVPs installed, in a folder called mediavps_3612, for Blue Planet to function. Can you verify that there is a mod.ini in the Blue Planet folder?
You should also turn the game up from 640x480 resolution and 16 bit color. It won't work too well there.
-
Okay, I reinstalled BP, told my computer to use my dedicated graphics card and got the compatible and nightly builds.
It works, thanks for the help.
-
I've also had an error show when i tried to load BP2 (directly or via another mod), but i get this error:
sounds.tbl(line 629):
Error: Missing required token: [#Flyby Sounds End]. Found [$UEF: 0 T_flyby1.wav, 0, 0.75, 1, 200, 400 ] instead.
ntdll.dll! KiFastSystemCallRet
kernel32.dll! WaitForSingleObjectEx + 67 bytes
kernel32.dll! WaitForSingleObject + 18 bytes
fred2_open_3_6_18.exe! <no symbol>
fred2_open_3_6_18.exe! <no symbol>
when i checked the file, the tags where set up correctly as they should, but it still throws the error. I tried removing the 'UEF' flybys, but the game complains of missing sounds.
Is to do with not having BP1 in? if it does, i need a link to it, due to the open installer cannot find a mirror to download it from.
Help would be grateful, due the fact i would like to see how the turret controller script works ;)
-
BP1 is here (http://www.hard-light.net/forums/index.php?topic=68213.0). Big fat sticky on top of board, can't miss it.
Can't run BP2 without BP1, simple as that. Forget the old installer, it's non-functional.
-
Replying here so that I do not create another thread about crashing. Used the .18 build, it crashed looked up fixes saw that I needed nightly builds, crashed again saw that I needed compatibility and it crashed again. This is the error that I keep on getting now. Each time I find a fix I go farther into the mod though! It happens right after they go into the portal!
Could not load in 2_CommandBrief-mb!
ntdll.dll! NtWaitForSingleObject + 12 bytes
KERNELBASE.dll! WaitForSingleObject + 18 bytes
fs2_open_3_6_19_SSE-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-20130415_r9630.exe! <no symbol>
-
That's ... strange.
It also means that you do not have the MediaVPs installed correctly. Please use this information (http://www.hard-light.net/forums/index.php?topic=56279.msg1180359#msg1180359) to generate a debug log that you should then post here. This'll tell us what's going wrong.
-
Thank you for the reply, trying to follow that guide and I am using the wxlauncher as it is the only one that works with windows8. Trying to get to the advanced settings tab and it stats that FreeSpace 2 Open did not generate a flag file. I saw that using the basic settings tab and then using the Debug SSE and then playing the mod until I get the error was the way to create the log file, but it did not sadly. Is this because of the "did not generate a flag file" problem?
The error afterwords also seems to be different now too. I do not know if this helps or not.
Could not load in 2_CommandBrief-mb!
ntdll.dll! NtWaitForSingleObject + 12 bytes
KERNELBASE.dll! WaitForSingleObject + 18 bytes
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
fs2_open_3_6_19_SSE-DEBUG-20130415_r9630.exe! <no symbol>
KERNEL32.DLL! BaseThreadInitThunk + 14 bytes
ntdll.dll! RtlInitializeExceptionChain + 133 bytes
ntdll.dll! RtlInitializeExceptionChain + 88 bytes
-
Please look for the log file in <FreeSpace 2 directory>\data\ and post it here.
-
I did the directions posted above, but to no avail. The file is not in my data folder :( Is it because of that one issue? with the advanced settings?
-
No. Since the debug build did run, the log file has been generated. There are instructions on how to find it in the post I linked to earlier.
In any case, the error message tells me that you do not have the mediavps installed correctly. Please follow the mediavps install instructions (http://www.hard-light.net/forums/index.php?topic=70736.0).
-
Fixed it by redownloading all the vp's; thank you for your help!. Although the debugg file still will not show up for me sadly.
-
Fixed it by redownloading all the vp's; thank you for your help!. Although the debugg file still will not show up for me sadly.
From the post that The E linked to earlier (http://www.hard-light.net/forums/index.php?topic=56279.msg1180359#msg1180359):
*NOTE FOR PEOPLE USING WINDOWS VISTA OR 7:
If you installed FS2 to C:\Program Files\ (or C:\Program Files (x86)\ on 64-bit versions of Windows), the log file will not be in FS2\data\, but rather in a "virtualized" folder. This can be found by either going to the data folder, and clicking on the "Compatibility Files" button in the Explorer window, or by manually navigating to C:\Users\<Your Username>\AppData\Local\VirtualStore\Program Files (x86)\<Rest of the path to your FS2 directory>\data
**NOTE FOR PEOPLE USING MAC OS X LION:
The library folder is hidden in the Finder for some excellent reason. Please see information here (http://www.macworld.com/article/161156/2011/07/view_library_folder_in_lion.html) on how to access the folder.
This quote almost certainly explains why you never saw a debug log.