Ok, a mod can move this over.
Small section of dxdiag. Entire thing is attached.
------------------
System Information
------------------
Time of this report: 6/22/2007, 22:45:34
Machine name: TAKECHIYO
Operating System: Windows 2000 Professional (5.0, Build 2195) Service Pack 4
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 03/30/05 00:22:50 Ver: 08.00.10
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz (2 CPUs), ~3.0GHz
Memory: 1024MB RAM
Page File: 230MB used, 1463MB available
Windows Dir: C:\WINNT
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.0001.0904 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
---------------
Display Devices
---------------
Card name: GIGABYTE RADEON 9200
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9200 AGP (0x5961)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_5961&SUBSYS_40181458&REV_01
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (70Hz)
Monitor: SyncMaster 931B/931BF/931BA/930BA(Analog)
Monitor Max Res: 1280,1024
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6599 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 1/25/2006 11:52:48, 255488 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n/a
Mini VDD: ati2mtag.sys
Mini VDD Date: 1/25/2006 11:52:31, 1478656 bytes
Device Identifier: {D7B71EE2-1A21-11CF-2F6E-1260A0C2CB35}
Vendor ID: 0x1002
Device ID: 0x5961
SubSys ID: 0x40181458
Revision ID: 0x0001
Revision ID: 0x0001
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: Not run
D3D7 Test Result: Not run
D3D8 Test Result: Not run
D3D9 Test Result: Not run
-------------
Sound Devices
-------------
Description: Realtek AC97 Audio
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1039&DEV_7012&SUBSYS_810F1043&REV_A0
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: ALCXWDM.SYS
Driver Version: 5.10.0000.6240 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 4/25/2007 16:20:48, 4030144 bytes
Other Files:
Driver Provider: Realtek Semiconductor Corp.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 8000, 192000
Static/Strm HW Mix Bufs: 26, 25
Static/Strm HW 3D Bufs: 26, 25
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: Yes, Yes
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
FS2 SCP:
Installed using Turey's installer
Executable: fs2_open3_6_9.exe
FS Open Launcher 5.5a
Used Flags:
---Enable specular
-- Enable glowmaps
---Enable environment maps
---Enable jpg/tga textures
---Apply Lightning to missiles
Error message:
The instruction set "0x0c00582f" referenced memory at "0x347de000". The memory could not be read.
[attachment deleted by admin]