Author Topic: [TEST]Beams, lasers, Blender, and the Anuket  (Read 3385 times)

0 Members and 1 Guest are viewing this topic.

Offline HotSnoJ

  • Knossos Online!
  • 29
    • http://josherickson.org
[TEST]Beams, lasers, Blender, and the Anuket

Needs more of something....
I have big plans, now if only I could see them through.

LiberCapacitas duo quiasemper
------------------------------
Nav buoy - They mark things

 

Offline Taristin

  • Snipes
  • 213
  • BlueScalie
    • Skelkwank Shipyards
[TEST]Beams, lasers, Blender, and the Anuket
Tha stars look a bit cheep, and the beams could blend into the glows better, but it's not bad.

Although IIRC, the Anuket doesn't have AAAf turrets... (I haven't looked at the tbl in so long though I may be wrong)
Freelance Modeler | Amateur Artist

 

Offline Woolie Wool

  • 211
  • Fire main batteries
[TEST]Beams, lasers, Blender, and the Anuket
How do you make the glows translucent like that?
16:46   Quanto   ****, a mosquito somehow managed to bite the side of my palm
16:46   Quanto   it itches like hell
16:46   Woolie   !8ball does Quanto have malaria
16:46   BotenAnna   Woolie: The outlook is good.
16:47   Quanto   D:

"did they use anesthetic when they removed your sense of humor or did you have to weep and struggle like a tiny baby"
--General Battuta

 

Offline HotSnoJ

  • Knossos Online!
  • 29
    • http://josherickson.org
[TEST]Beams, lasers, Blender, and the Anuket
Quote
Originally posted by Woolie Wool
How do you make the glows translucent like that?
Which ones? the beams or the glow from where they start?

The glows from the starting point were made with, duh :rolleyes:, the beam glow from the sparky VP. I used the Sequencer to layer this render so the start-point glows were located in the correct locations. ;7

If you are meaning the beams, they are just a line of vertices with "halo" enabled and special settings. So it's like particles. :D you can find information on this in any Blender laser tutorial.
« Last Edit: October 16, 2003, 01:56:18 pm by 516 »
I have big plans, now if only I could see them through.

LiberCapacitas duo quiasemper
------------------------------
Nav buoy - They mark things

 

Offline an0n

  • Banned again
  • 211
  • Emo Hunter
    • http://nodewar.penguinbomb.com/forum
[TEST]Beams, lasers, Blender, and the Anuket
Quote
Originally posted by Woolie Wool
How do you make the glows translucent like that?

In 3D:

Opacity Map = Colour Map
"I.....don't.....CARE!!!!!" ---- an0n
"an0n's right. He's crazy, an asshole, not to be trusted, rarely to be taken seriously, and never to be allowed near your mother. But, he's got a knack for being right. In the worst possible way he can find." ---- Yuppygoat
~-=~!@!~=-~ : Nodewar.com

 

Offline HotSnoJ

  • Knossos Online!
  • 29
    • http://josherickson.org
[TEST]Beams, lasers, Blender, and the Anuket
Quote
Originally posted by an0n

In 3D:

Opacity Map = Colour Map
I used blender. :blah: Infacto I don't even have a copy of 3D max.
I have big plans, now if only I could see them through.

LiberCapacitas duo quiasemper
------------------------------
Nav buoy - They mark things

 

Offline an0n

  • Banned again
  • 211
  • Emo Hunter
    • http://nodewar.penguinbomb.com/forum
[TEST]Beams, lasers, Blender, and the Anuket
Not just in MAX. In any multi-map capable 3D program, if you get something like a frame from one of the thruster ani's and apply it to a box, then use the same frame for the opacity/transparency map, it'll be invisible in all the right places.
"I.....don't.....CARE!!!!!" ---- an0n
"an0n's right. He's crazy, an asshole, not to be trusted, rarely to be taken seriously, and never to be allowed near your mother. But, he's got a knack for being right. In the worst possible way he can find." ---- Yuppygoat
~-=~!@!~=-~ : Nodewar.com

 

Offline Taristin

  • Snipes
  • 213
  • BlueScalie
    • Skelkwank Shipyards
[TEST]Beams, lasers, Blender, and the Anuket
Hm... True, but I still prefer to filter black as transparent in TS...

From time to time I do the opacity maps, but not enough.
Freelance Modeler | Amateur Artist

 

Offline Carl

  • Render artist
  • 211
    • http://www.3dap.com/hlp/
[TEST]Beams, lasers, Blender, and the Anuket
Quote
Originally posted by Raa Tor'h
Hm... True, but I still prefer to filter black as transparent in TS...


good. that's how Freespace does it.
"Gunnery control, fry that ****er!" - nuclear1

 

Offline Setekh

  • Jar of Clay
  • 215
    • Hard Light Productions
[TEST]Beams, lasers, Blender, and the Anuket
Just personally, I would make those ships a lot brighter - with a yellow sun and 3 bright beams in the scene, I think it should be a lot higher lit. :)
- Eddie Kent Woo, Setekh, Steak (of Steaks), AWACS. Seriously, just pick one.
HARD LIGHT PRODUCTIONS, now V3.0. Bringing Modders Together since January 2001.
THE HARD LIGHT ARRAY. Always makes you say wow.

 

Offline Gloriano

  • silver dracon
  • 210
  • Oh
[TEST]Beams, lasers, Blender, and the Anuket
not bad:yes:
You must have chaos within you to give birth to a dancing star.- Nietzsche

When in despair I remember that all through history the way of truth and love has always won; there have been tyrants and murderers, and for a time they can seem invincible, but in the end they always fall.- Mahatma Gandhi

  

Offline HotSnoJ

  • Knossos Online!
  • 29
    • http://josherickson.org
[TEST]Beams, lasers, Blender, and the Anuket
Quote
Originally posted by Setekh
Just personally, I would make those ships a lot brighter - with a yellow sun and 3 bright beams in the scene, I think it should be a lot higher lit. :)
*cough*[TEST]Beams, lasers, Blender, and the Anuket*cough*

[EDIT]Preview and submit buttons so close. :hopping: Anyway, it's pretty bright. So either it's my monitor or your's. And the light is blue light not white or yellow.
« Last Edit: October 17, 2003, 09:14:54 am by 516 »
I have big plans, now if only I could see them through.

LiberCapacitas duo quiasemper
------------------------------
Nav buoy - They mark things

 

Offline Setekh

  • Jar of Clay
  • 215
    • Hard Light Productions
[TEST]Beams, lasers, Blender, and the Anuket
Well, you did say "Needs more of something....". ;) Besides, you learn ten times more from criticism than from compliments, I'm really trying to build you up here. :nod:
- Eddie Kent Woo, Setekh, Steak (of Steaks), AWACS. Seriously, just pick one.
HARD LIGHT PRODUCTIONS, now V3.0. Bringing Modders Together since January 2001.
THE HARD LIGHT ARRAY. Always makes you say wow.

 

Offline HotSnoJ

  • Knossos Online!
  • 29
    • http://josherickson.org
[TEST]Beams, lasers, Blender, and the Anuket
Quote
Originally posted by Setekh
Well, you did say "Needs more of something....". ;) Besides, you learn ten times more from criticism than from compliments, I'm really trying to build you up here. :nod:
You're right. But I'm righter. :p






:nervous: :runs:
I have big plans, now if only I could see them through.

LiberCapacitas duo quiasemper
------------------------------
Nav buoy - They mark things

 
[TEST]Beams, lasers, Blender, and the Anuket
OOH, OOH! I KNOW WHAT YOU'RE MISSING!... BACKGROUND NOISE STUFF!.. i.e. planets, nebulae, etc... but they again, it's only a test so... :)  Oh well, guess I'm wrong :(