build your own > ANY company.
In other news, I'm redoing my computers right now. I fixed my Lian-Li PC-9F's collapsed power button--turns out the switch assembly fell through the floor of its holder. I popped it back so I'm hopeful it won't be an issue again. If it is, some superglue should fix it. I switched PSU's on the main--from a Corsair 750TX to an XFX 650W XXX-Edition. Also added a new WD Black 1TB drive. The new drive matches my old Black 1TB drive so I'll be putting them into RAID0 later. Otherwise, I added some SATA pass-through caps. I need to figure out a solution to power the optical drive.
My two new WD Black 2TB drives are currently formatting while my pair of Samsung F4EG 2TB's (in RAID1) backup to the new WD Black 1TB drive. I'm going to setup a mismatched RAID5 array across all 4 2TB drives--with any luck I'll have a 6TB usable array by the end of the night. Otherwise, if they disagree too much, I'll probably use the old Samsung drives in RAID1 and the new Black 2TB drives in a second RAID1. I've still gotta run a scandisk on all the drives.